Disconnecting the connector is strongly advised to prevent any potential short circuits during disassembly.
Additionally, make sure to carefully unplug the connector for the rechargeable battery without using a metal tool.

Samsung A32 Disassembly

We heat the phone cover, the temperature is about 70° C , to facilitate disassembly

Turn off your phone before beginning disassembly.
Step 2:

Use the paperclip or key tool (also known as a needle). Pull the SIM and Memory card (Micro SD) tray out by inserting the tip all the way into the hole till the tray ejects.
Keep an eye out! On the edge of the phone's housing, there is a hole that the tool must fit into. Keep your pressure moderate. The tray eject mechanism could become damaged.
Step 3:

We advise utilizing a specialized heating tool such a heating mat, heat gun, or separating machine. It will make the procedure simpler. You can use a hairdryer at home, but you'll need to manufacture or have on hand a special nozzle to gently heat and concentrate the heat flow where it's needed.
To loosen the glue below, the back cover's surface needs to be heated.
The heating temperature is roughly 70° C.
For separation, use a pick or a thin plastic film. You can use isopropyl alcohol to speed up the procedure. Passing the tool between the pieces that need to be split is frequently extremely tough. Away from the FFC cables or buttons, pick the far edge.
Avoid using a lever or any other force to separate objects that could harm the components inside.
Step 4:

Remove the 17 screws with a Phillips 1.5 mm PH000 screwdriver.
Step 5:

Carefully remove the speaker and antenna-equipped middle cover.
Step 6:

As soon as you can, disconnect the battery connector.

Before You Begin

Before starting the disassembly process, gather the necessary tools and materials:

1. Precision Screwdriver Set: Includes various screwdriver heads for disassembling the device.
2. Plastic Pry Tools or Guitar Picks: Used to safely separate the phone's components without damaging them.
3. Heat Gun or Hair Dryer: Optional, but helpful for softening adhesive seals.
4. Container: Small containers or compartments to organize and store screws and small parts.

Step-by-Step Disassembly Guide

Step 1: Power Off and Remove SIM Tray

1. Power off your Samsung Galaxy A32 and eject the SIM card tray using the SIM ejector tool.

Step 2: Remove Back Cover

1. Heat the edges of the back cover using a heat gun or hair dryer to soften the adhesive.
2. Insert a plastic pry tool or guitar pick between the back cover and the frame.
3. Gently slide the tool around the edges to loosen the adhesive.
4. Carefully lift off the back cover once the adhesive is sufficiently loosened.

Step 3: Disconnect Battery Connector

1. Locate the battery connector near the bottom of the phone's motherboard.
2. Using a plastic spudger or tweezers, gently disconnect the battery connector to prevent any power flow during disassembly.

Step 4: Remove Rear Camera Module

1. Identify the rear camera module at the top of the phone's motherboard.
2. Unscrew any screws securing the camera module using the appropriate screwdriver.
3. Carefully lift the camera module off the motherboard and set it aside.

Step 5: Disconnect Flex Cables and Remove Motherboard

1. Identify and disconnect all flex cables connected to the motherboard, including display, charging port, and other connectors.
2. Unscrew the screws securing the motherboard to the frame.
3. Lift the motherboard out of the frame carefully, ensuring no cables are still attached.

Step 6: Remove Front-Facing Camera and Other Components

1. Locate the front-facing camera module at the top of the phone's display assembly.
2. Unscrew any screws securing the camera module.
3. Disconnect any flex cables connected to the front-facing camera and lift it out of the assembly.
4. Repeat this process for other components such as the earpiece speaker, proximity sensor, and ambient light sensor if necessary.

Step 7: Separate Display Assembly from Frame

1. Heat the edges of the display assembly to soften the adhesive.
2. Insert a plastic pry tool or guitar pick between the display assembly and the frame.
3. Gently slide the tool around the edges to loosen the adhesive.
4. Carefully lift the display assembly off the frame once the adhesive is sufficiently loosened.

Step 8: Clean and Perform Maintenance

With the Samsung Galaxy A32 disassembled, take the opportunity to clean the components and perform any necessary maintenance or repairs. Replace any damaged parts as needed.

Conclusion

Disassembling the Samsung Galaxy A32 requires patience, precision, and the right tools. By following this step-by-step guide, you can safely and effectively take apart your device for repairs, maintenance, or customization. Remember to proceed with caution and take your time to avoid damaging any components. If you're unsure about any step, consult professional repair guides or consider seeking assistance from a qualified technician. With the right approach, you can confidently tackle any disassembly task and keep your Samsung Galaxy A32 in optimal condition for years to come.