Itel P40 Hard Reset | Pattern Lock Remove
Welcome to the Advanced Settings website followers. In this topic, we will explain how to factory reset the Itel P40 (P662L) .
 |
| Itel P40 (P662L) Pattern Lock Remove |
We will format the Itel P40 phone using only the buttons, without the need for a program on the computer or anything else. The method is very easy and simple. All you have to do is follow the steps as I will explain them in the lesson below.
As is known for all Itel phones, we will press the volume up button and the power button to put the phone in programmer mode.
In this mode, the screen becomes black with small writing in blue, yellow and red, through which we will format the Itel P40 . All you have to do, our dear viewers, is follow the video that will be included in the topic or the article itself, through which we will solve our problem.
2.Boot into Recovery Mode:
3.Navigate Recovery Mode:
In this mode, the screen becomes black with small writing in blue, yellow and red, through which we will format the Itel P40 . All you have to do, our dear viewers, is follow the video that will be included in the topic or the article itself, through which we will solve our problem.
How to Hard Reset Itel P40 (P662L) and Remove Pattern Lock
Losing access to your Itel P40 (P662L) due to a forgotten pattern lock can be frustrating. Fortunately, there’s a simple method to reset the device and regain access. Follow these steps to perform a hard reset on your Itel P40 and remove pattern lock.Hard Reset via Recovery Mode
Performing a hard reset will erase all data on your device, including apps, settings, and personal files. Only proceed if you’ve tried other recovery methods or if a backup is available.
1.Power Off the Device: Make sure your Itel P40 is turned off completely.2.Boot into Recovery Mode:
- Press and hold the Volume Up button and the Power button simultaneously until the Itel logo appears.
- Release both buttons once the Recovery Mode screen appears.
3.Navigate Recovery Mode:
- In Recovery Mode, use the Volume buttons to scroll and the Power button to confirm selections.
- Scroll to the "Wipe data/factory reset" option using the Volume buttons.
- Confirm the selection by pressing the Power button.
- On the next screen, select "Yes" to confirm the factory reset process.
- Wait for the reset process to complete. This will erase all data on the device, including the pattern lock.
- Once the reset is complete, select the "Reboot system now" option from the Recovery Mode menu.
- Your Itel P40 will restart with factory settings, and the pattern lock will be removed.
- Follow the on-screen instructions to set up your device as a new one.
Remember that performing a factory reset will erase all data on your device, so make sure to back up any important information before proceeding. If you are unable to access Recovery Mode or face any issues during the process, consider contacting Itel's customer support for further assistance.
What should I do if the Itel P40 doesn't enter Recovery Mode
If Itel P40 (P662L) doesn’t enter Recovery Mode, try these troubleshooting steps to resolve the issue:Check Button Combination
Sometimes, the button combination may differ slightly. Try the following alternatives:
- Volume Up + Power
- Volume Down + Power
- Volume Up + Volume Down + Power
Ensure Battery Charge
Make sure your device has enough charge (50%) to perform a reset. If it’s low on battery, plug it in, allow it to charge for a few minutes, and try again.Use Safe Mode (if the phone starts but doesn’t enter Recovery)
If the Itel P40 turns on but doesn’t reach the recovery menu, boot into Safe Mode instead:
- Press and hold the Power button until the Power Off option appears.
- Press and hold the Power Off option until you see a prompt to enter Safe Mode.
Retry After a Soft Reset
If none of the combinations work, try a soft reset by pressing and holding the Power button for about ten seconds until the device restarts. Then, try to access Recovery Mode again.Contact Support or Visit a Service Center
If the device is still unresponsive, there may be a software or hardware issue. In that case, contact Itel support or visit a professional service center to diagnose and resolve the issue.Following these steps should help you access Recovery Mode on your Itel P40 (P662L).
Reset via Google’s Find My Device
If you previously enabled Find My Device on your Itel P40 (P662L), you can reset it remotely:- Go to Google’s Find My Device on another device or computer.
- Log in with the Google account associated with the Itel P40.
- Select your Itel P40 from the list.
- Click on “Erase Device” to remove all data, including the lock screen.
Performing a hard reset is a reliable way to remove a pattern lock on the Itel P40, but always remember to back up your data when possible. If the issue persists after following these steps, consider visiting a professional service center.
Frequently asked questions about factory reset itel p40
- How to hard reset an Itel phone?
- How to hard reset Itel P40 Plus without PC?
- What is the factory reset password for Itel?
- How to enter recovery mode on Itel P40?
- How do I factory reset my p40?
- How to remove itel P40 from safe mode?
